Product Description

In as much as the compressed air has many advantages when compared to other energy sources in industrial fields, the use of screw type compressors has been more favourable during the last decade. In order for separators to last long, the working media along with intake filter of the compressor must be very clean , filtration must be good, and the filter clean up and changing intervals must be prompt. If these are fulfilled properly, it will also help save energy. All the FILSAN separators used in rotary vane or rotary screw type compressors which manufactured domestically or abroad, are produced by using specially and meticilously designed components of highest quality and standards. For this reason, most of the compressor manufactures and their exclusive distributors have a tendency to use the FILSAN products. PLEATED AIR /OIL SEPARATORS The capacity of separators is increased by increasing the surface area while keeping the size constant. This is done by pleating. High pressure pleated air/oil separators are manufactured by FILSAN with high standart and quality. FILSAN D-TYPE SEPARATORS These newly designed separators, as shown in Figure, are so designed that they fit the smaller separator housings without reducing the capacity or operating performance of the compressor. When compared to a conventional separator of the same dimensions, these separators have double or even triple capacity. The mentioned increase in capacity is simply achieved by using higher number of wraps in the separator